Most hardwood refinishing jobs take a few days from the first pass of the sander to the last coat of finish. Add time if you're staining, choosing an oil-based finish, or doing stairs. Then the floor needs time to harden: walking in socks comes first, furniture a few days later, and rugs last.
A typical refinishing timeline
Every floor is different, but most jobs follow the same order. Here's what each stage involves and what usually slows it down.
| Stage | What happens | What affects the timing |
|---|---|---|
| Prep | Rooms are emptied, the work area is closed off, and any damaged boards are repaired or replaced | How many rooms, how much repair work |
| Sanding | Several passes with a drum sander and edger take the floor down to fresh wood, then it's vacuumed and cleaned | Square footage, old finish, stairs and closets |
| Stain (optional) | Samples first, then stain goes on and has to dry fully before any finish | The stain product, humidity, temperature |
| Finish coats | Multiple coats of polyurethane, with drying time and usually a light buff between coats | Water- or oil-based, number of coats, weather |
| Dry and cure | The finish dries enough to walk on, then keeps hardening for days to weeks | The finish, ventilation, indoor temperature |
Natural vs. stained
A natural finish skips a step. With stain, there are samples to look at and approve, then the stain itself has to dry completely before the first coat of finish goes on. Rushing that step is how finishes end up peeling or blotchy, so a stained floor usually adds time to the schedule.
Water-based vs. oil-based finish
The finish you choose has the biggest effect on how long the job takes:
- Water-based polyurethane dries faster and has less odor, so coats can go on sooner and you're back on your floors sooner.
- Oil-based polyurethane gives a warm amber tone, but each coat needs longer to dry, often overnight, and the smell lingers longer.
Neither is wrong. It's a trade-off between the look you want and how quickly you need the rooms back.
When can you walk on it, move furniture back, and put rugs down?
"Dry" and "cured" aren't the same thing. A finish can feel dry to the touch within hours but keep hardening for weeks. That's why things come back in stages:
- Socks only: with most water-based finishes, light foot traffic is usually fine about a day after the last coat. Oil-based takes longer.
- Furniture: usually a few days after the final coat. Put felt pads on the legs and lift pieces into place; don't slide them.
- Rugs: wait the longest, often a couple of weeks or more, so the finish can cure without being covered.
- Pets: keep them off until the finish is hard enough to handle nails, and trim those nails before they're back.
The exact times depend on the product, so go by what your contractor tells you for the finish on your floor.
New Hampshire weather and drying times
Finish dries best in a comfortable, steady indoor climate. Around Salem and Southern NH, the seasons get a say:
- Humid summers slow drying between coats. Running the air conditioning helps pull moisture out of the air.
- Cold rooms slow it down too, so keep the heat on at normal settings during a fall or winter job.
- Dry winter air is when hardwood shrinks and small gaps between boards are most noticeable. That's normal seasonal movement, not a problem with the refinish.
Can you live at home during the job?
Usually, yes, as long as you can stay off the rooms being worked on. A few things make it easier:
- Plan a route through the house that doesn't cross the work area, especially to the kitchen, bathrooms, and the door you use most.
- If the floors connect every part of the house, the work may be done in sections so you can still get around.
- Oil-based finishes have a strong smell while they dry. Some families with young kids or pets choose to stay elsewhere for a night or two.
- Sanding makes dust. A good crew contains it and cleans up every day, but no one can promise zero dust.
How to get your house ready
- Empty the rooms completely, including closets that are getting refinished.
- Take down curtains that touch the floor and anything fragile on nearby walls and shelves.
- Decide where the furniture will live for the week, and plan for a few days without those rooms.
- Make a plan for pets so they can't wander onto wet finish.
- Pick your stain color from samples on your own floor, not from a photo or a chip.
- Ask for the schedule in writing, including when you can walk on the floors and when furniture can go back.
Not sure whether your floors can be refinished at all? Start with our guide to refinishing vs. replacing hardwood. To see how we handle the work, visit our hardwood floor refinishing page, or request a free estimate below and we'll give you a schedule for your floors.