Often, yes. Engineered hardwood has a layer of real wood on top, called the wear layer, and if that layer is thick enough it can be sanded and refinished like solid hardwood. If it's too thin, a screen and recoat can freshen the finish, and if it's worn through or damaged, it's time to replace.
What the wear layer is
Solid hardwood is wood all the way through. Engineered hardwood is built in layers: a top layer of real hardwood glued over a core of plywood or another engineered material. The core makes the boards more stable as humidity changes, which is why engineered floors are popular over concrete and in some below-grade spaces.
That top layer of real wood is the wear layer. It's the only part that can be sanded, and every full sanding removes some of it. Its thickness decides how many times, if any, the floor can be refinished.
How to check your wear layer
- Look at an exposed edge. Pull up a floor vent cover, or look at a board end at a threshold or the top of a stairway. You'll see the hardwood layer on top and the core below it.
- Find the product. If you have a leftover box, the original paperwork, or the product name, the manufacturer's specs list the wear layer thickness.
- Think about its history. If the floor has been sanded before, some of the wear layer is already gone.
- Ask at the estimate. If you can't tell, that's one of the first things a contractor should check before recommending anything.
Sand, screen and recoat, or replace?
| Full sand and refinish | Screen and recoat | Replace | |
|---|---|---|---|
| What it is | Sanded to fresh wood, then stained or left natural and sealed | Old finish scuffed up, fresh coat of finish on top | Old boards out, new floor in |
| Best for | Scratches, gray traffic paths, a color change | Dull, lightly scuffed finish that hasn't worn through | Thin or worn-through wear layer, water damage |
| Wear layer needed | Thick enough to sand safely | Any, as long as the finish is intact | Not a factor |
| Changes the color | Yes | No | Yes, pick a new floor |
When sanding works
If the wear layer is thick enough and the boards are flat and solid, engineered hardwood can be sanded to fresh wood and refinished, with stain or a natural finish. Sanding has to be more careful than on solid hardwood, because there's less wood to work with and going through the wear layer exposes the core.
When a screen and recoat makes more sense
A screen and recoat doesn't cut into the wood. The existing finish is lightly abraded and a new coat goes on top. It's a good fit when the finish looks tired but the damage hasn't reached the wood, or when the wear layer is too thin to sand. It won't fix deep scratches, gray spots where the finish has worn through, or the color. Some factory finishes on prefinished floors are hard for a new coat to stick to, so that needs to be checked first.
When it's time to replace
- The wear layer is too thin to sand and the finish is already worn through
- You can see the core showing through at worn spots or edges
- Boards are swollen, cupped, or separating in layers from water
- Deep gouges or pet stains that go past the wear layer
Sometimes only part of the floor needs new boards. Other times it makes sense to start over with a new floor. Our guide on whether to refinish or replace hardwood floors walks through that choice. Our guide to hardwood vs. LVP compares the options, and our hardwood and LVP installation page explains how we handle a new floor.
Engineered hardwood in New Hampshire homes
Southern NH swings from humid summers to dry, heated winters, and wood moves with it. Engineered hardwood handles those swings better than solid wood, which is a big part of why it's used over concrete slabs and in finished basements. Keeping indoor humidity steady helps any wood floor, refinished or not.
Planning a refinish
- Find out what you have before you choose: solid, engineered, or a look-alike like laminate or LVP, which can't be sanded.
- If the floor has beveled edges between boards, ask how sanding will change the look.
- Ask for stain samples on your own floor. Color looks different on every species.
- Ask how long the job will take and when you can use the rooms again. Our guide on how long refinishing takes walks through it.
See how we work on our hardwood floor refinishing page, or request a free estimate below and we'll check your wear layer and tell you honestly what makes sense.